Hatebur COLDmatic CM 725

The versatile and flexible cold forming machine.

The COLDmatic CM 725 is the ideal machine for forming precise and complex parts. It is characterized by a compact design, reduced space requirement, short commissioning time, easy set-up and changeover.

7-station

Coldformer

30 mm

Part diameter

180 parts

Output per minute

2.500 kN

Press capacity

Hatebur COLDmatic

Benefit from the following advantages

  • Accurate servo infeed system
  • Precision high-speed shearing
  • Precise and versatile part transfer system
  • High flexibility for a broad range of applications
  • Gentle part discharge

Applications

Our technology means technical precision and versatility.

The COLDmatic CM 725 is ideal for the production of formed parts that have a diameter of up to approx. 30 mm. The seven-station technology is ideal for the manufacturing of demanding and complex part geometries.

Thanks to this, flat parts as well as those that have an extremely thin collar or parts that are difficult to transport can be precisely formed. The forming can take place both on the punch- and die-side.

Technical specifications

Hatebur COLDmatic Model series

  • Forming stations
  • Max. wire diameter (at 600 N/mm2 tensile strength) mm
  • Cut-off length mm
  • Max. outer diameter* mm
  • Strokes (continuously variable) min-1
  • Total press capacity kN

CM 4-5ECO

5

20

8 – 125

~ 30

110 – 160
(110 – 180)***

1700

CM 4-5ECO WS

5

20

8 – 125

~ 30

110 – 160
(110 – 180)***

1700

CM 625

6

20

8 – 125

~ 30

110 – 180**

2500

CM 625 WS

6

20

8 – 125

~ 30

110 – 180**

2500

CM 725

7

20

8 – 125

~ 30

110 – 180**

2500

CM 725 WS

7

20

8 – 125

~ 30

110 – 180**

2500

  • CM 725
  • Forming stations
    7
  • Max. wire diameter (at 600 N/mm2 tensile strength)
    20 mm
  • Cut-off length
    8 – 125 mm
  • Max. outer diameter*
    ~ 30 mm
  • Strokes (continuously variable) min-1
    110 – 180**
  • Total press capacity
    2500 kN

* For round parts made of steel, dependent on the forming degree, the sequence of operations, the material and temperature.
** Stroke rate reduced to between 140 – 180 spm at a cut-off length of 90 – 125 mm
*** Option for high-speed

WS = warm series

Do you have any questions?

Do you have any questions?

Contact us.

I have read the privacy policy and agree to its terms.