The HOTmatic AMP 50-9 HFE has 4 forming stations and is the ideal machine for the fully automated production of forgings up to diameter of 108 mm at a production rate of 100 parts per minute.
The HFE equipment enables the machine to produce hot forward extruded parts.
Hotformer
Part diameter
Output per minute
Total press capacity
The HOTmatic AMP 50-9 HFE is suited for forgings that are primarily used in the automotive and bearing industry. Gear wheels, flanges, bearing blanks, etc. For simple to complex part geometries and diameters of up to 108 mm, the AMP 50-9 HFE is the ideal hotformer.
HOTmatic Model series
AMP 20 S
3
14 – 28
0,02 – 0,17
15 – 40
~ 38
–
36**
140 – 200
900
AMP 20 N
3
14 – 28
0,024 – 0,217
20 – 45
~ 48
–
41**
140 – 200
1500
AMP 30 S
3
18 – 40
0,05 – 0,7
20 – 72
~ 67
~ 58
60
85 – 140
2500
AMP 50-9
4
28 – 55
0,17 – 2,0
32 – 110
~ 108
~ 100
90
60 – 100
9000
AMP 50-9 HFE
4
28 – 55
0,17 – 2,0
32 – 110
~ 108
~ 100
90
60 – 100
9000
AMP 70
4
36 – 75
0,4 – 5,0
50 – 150
~ 145
~ 122
130
50 – 80
15000
AMP 70 HFE
4
36 – 75
0,4 – 5,0
50 – 150
~ 145
~ 122
130
50 – 80
15000
AMP 70 XL
4
36 – 75
0,4 – 5,0
50 – 150
~ 165
~ 122
130
50 – 80
15000
AMP 70 XL HFE
4
36 – 75
0,4 – 5,0
50 – 150
~ 165
~ 122
130
50 – 80
15000
HM 35 SAM
4
18 – 45
0,06 – 0,9
28 – 75
~ 75
~ 68
65
110 – 150
3800
HM 75 XL
4
45 – 90
0,95 – 7,5
75 – 175
~ 180
~ 144
–
–
–
* For round parts made of steel, depending on forming degree, sequence of operation, material and temperature.
** Max. width across flats (hexagon) made of brass approx. 38 mm
HOTmatic Model series