English
Deutsch
Italiano
中文
日本語
Hatebur HOTmatic AMP 70 HFE
The reliable hotformer for a broad range of parts.
The HOTmatic AMP 70 HFE is the ideal machine for the fully automated production of forgings with a diameter of up to 145 mm and a production rate of up to 80 parts per minute.
The HFE equipment enables the machine to produce hot forward extruded parts.
4-station
Hotformer
145 mm
Part diameter
50-80 parts
Output per minute
15.000 kN
Press capacity
Hatebur HOTmatic
Benefit from the following advantages
- Very diverse parts range
- Forwards extruded forgings
- Servo infeed in combination with ESA 600 for maximum process reliability
- Up to 5 kg part weight
- Innovative touchscreen machine controls
Applications
Our technology means technical precision.
The HOTmatic AMP 70 HFE is the ideally suited machine for forging of automotive and bearing parts such as wheel hubs, gear blanks, bearing rings, ect. from steel bars in a fully-automated process and large annual volumes.
Technical specifications
HOTmatic Model series
- Forming stations
- Bar diameter mm
- Initial weight kg
- Cut-off length mm
- Max. outer diameter* mm
- Max. outer diameter for combination parts mm
- Max. width across falts (hex) made of steel ca. mm
- Strokes per minute (continuously variable)
- Total press capacity kN
AMP 20 S
3
14 – 28
0,02 – 0,17
15 – 40
~ 38
–
36**
140 – 200
900
AMP 20 N
3
14 – 28
0,024 – 0,217
20 – 45
~ 48
–
41**
140 – 200
1500
AMP 30 S
3
18 – 40
0,05 – 0,7
20 – 72
~ 67
~ 58
60
85 – 140
2500
AMP 50-9
4
28 – 55
0,17 – 2,0
32 – 110
~ 108
~ 100
90
60 – 100
9000
AMP 50-9 HFE
4
28 – 55
0,17 – 2,0
32 – 110
~ 108
~ 100
90
60 – 100
9000
AMP 70
4
36 – 75
0,4 – 5,0
50 – 150
~ 145
~ 122
130
50 – 80
15000
AMP 70 HFE
4
36 – 75
0,4 – 5,0
50 – 150
~ 145
~ 122
130
50 – 80
15000
AMP 70 XL
4
36 – 75
0,4 – 5,0
50 – 150
~ 165
~ 122
130
50 – 80
15000
AMP 70 XL HFE
4
36 – 75
0,4 – 5,0
50 – 150
~ 165
~ 122
130
50 – 80
15000
HM 35 SAM
4
18 – 45
0,06 – 0,9
28 – 75
~ 75
~ 68
65
110 – 150
3800
HM 75 XL
4
45 – 90
0,95 – 7,5
75 – 175
~ 180
~ 144
–
–
–
- AMP 70 HFE
- Forming stations4
- Bar diameter36 – 75mm
- Initial weight0,4 – 5,0kg
- Cut-off length50 – 150mm
- Max. outer diameter*~ 145mm
- Max. outer diameter for combination parts~ 122mm
- Max. width across falts (hex) made of steel ca.130mm
- Strokes per minute (continuously variable)50 – 80
- Total press capacity15000kN
* For round parts made of steel, depending on forming degree, sequence of operation, material and temperature.
** Max. width across flats (hexagon) made of brass approx. 38 mm
Further products
HOTmatic Model series
