HOTmatic AMP 70
HOTmatic AMP 70
HOTmatic AMP 70
HOTmatic AMP 70

Hatebur HOTmatic AMP 70

The reliable hotformer for a broad range of parts.

The HOTmatic AMP 70 is the ideal machine for the fully automatedproduction of forgings with a diameter of up to 145 mm and a production rate of up to 80 parts per minute.

4-station

Hotformer

145 mm

Part diameter

50-80 parts

Output per minute

15.000 kN

Press capacity

Hatebur HOTmatic AMP 70

Benefit from the following advantages

  • Very diverse parts range
  • Servo infeed in combination with ESA 600 for maximum process reliability
  • Up to 5 kg part weight
  • Innovative touchscreen machine controls

Applications

Our technology means technical precision.

The HOTmatic AMP 70 is the ideally suited machine for forging  of automotive and bearing parts such as wheel hubs, gear blanks, bearing rings, ect. from steel bars in a fully-automa­ted process and large annual volumes.

Technical specifications

HOTmatic Model series

  • Forming stations
  • Bar diameter mm
  • Initial weight kg
  • Cut-off length mm
  • Max. outer diameter* mm
  • Max. outer diameter for combination parts mm
  • Max. width across falts (hex) made of steel ca. mm
  • Strokes per minute (continuously variable)
  • Total press capacity kN

AMP 20 S

3

14 – 28

0,02 – 0,17

15 – 40

~ 38

36**

140 – 200

900

AMP 20 N

3

14 – 28

0,024 – 0,217

20 – 45

~ 48

41**

140 – 200

1500

AMP 30 S

3

18 – 40

0,05 – 0,7

20 – 72

~ 67

~ 58

60

85 – 140

2500

AMP 50-9

4

28 – 55

0,17 – 2,0

32 – 110

~ 108

~ 100

90

60 – 100

9000

AMP 50-9 HFE

4

28 – 55

0,17 – 2,0

32 – 110

~ 108

~ 100

90

60 – 100

9000

AMP 70

4

36 – 75

0,4 – 5,0

50 – 150

~ 145

~ 122

130

50 – 80

15000

AMP 70 HFE

4

36 – 75

0,4 – 5,0

50 – 150

~ 145

~ 122

130

50 – 80

15000

AMP 70 XL

4

36 – 75

0,4 – 5,0

50 – 150

~ 165

~ 122

130

50 – 80

15000

AMP 70 XL HFE

4

36 – 75

0,4 – 5,0

50 – 150

~ 165

~ 122

130

50 – 80

15000

HM 35 SAM

4

18 – 45

0,06 – 0,9

28 – 75

~ 75

~ 68

65

110 – 150

3800

HM 75 XL

4

45 – 90

0,95 – 7,5

75 – 175

~ 180

~ 144

  • AMP 70
  • Forming stations
    4
  • Bar diameter
    36 – 75mm
  • Initial weight
    0,4 – 5,0kg
  • Cut-off length
    50 – 150mm
  • Max. outer diameter*
    ~ 145mm
  • Max. outer diameter for combination parts
    ~ 122mm
  • Max. width across falts (hex) made of steel ca.
    130mm
  • Strokes per minute (continuously variable)
    50 – 80
  • Total press capacity
    15000kN

* For round parts made of steel, depending on forming degree, sequence of operation, material and temperature.
** Max. width across flats (hexagon) made of brass approx. 38 mm

Do you have any questions?

Do you have any questions?

Contact us.

I have read the privacy policy and agree to its terms.