This website uses cookies

This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Hatebur
COLDmatic CM 4-5ECO H

The compact and cost-efficient cold forming machine.

The COLDmatic CM 4-5ECOH is the ideal machine for forming precise and complex parts. It is characterized by a compact design, reduced space requirement and short commissioning time.

5-station

Coldformer

32 mm

Part diameter

180 parts

Output per minute

1.700 kN

Press capacity

Hatebur
COLDmatic CM 4-5ECO H

Benefit from the following advantages:

  • Compact design with low space requirement
  • Accurate servo infeed system
  • Precision high-speed shearing
  • Precise and versatile part transfer system
  • High flexibility for a broad range of applications

Applications

Our technology means technical precision.

The COLDmatic CM 4-5ECOH is ideal for the production of formed parts that have a diameter of up to approx. 32 mm. The five-station techology is ideal for the manufacturing of demanding and complex part geometries.

Thanks to this, flat parts as well as those that have an extremely thin collar or parts that are difficult to transport can precisely formed. The forming can take place both on the punch- and die-side.

Technical specifications

COLDmatic Model series

  • Forming stations
  • Max. wire diameter (at 500 N/mm2 tensile strength) mm
  • Cut-off length mm
  • Max. outer diameter* mm
  • Strokes (continuously variable) min-1
  • Total press capacity kN
  • Inductive heating

CM 4-5ECO

5

22

8 – 125

~ 32

110 – 160

1700

CM 4-5ECO H

5

20

8 – 125

~ 32

110 – 180

1700

CM 4-5ECO WS

5

22

8 – 125

~ 32

110 – 160

1700

CM 4-5ECO H WS

5

20

8 – 125

~ 32

110 – 180

1700

CM 625

6

22

8 – 125

~ 32

110 – 170

2500

CM 625 WS

6

22

8 – 125

~ 32

110 – 170

2500

CM 725

7

22

8 – 125

~ 32

110 – 170

2500

CM 725 WS

7

22

8 – 125

~ 32

110 – 170

2500

  • CM 4-5ECO H
  • Forming stations
    5
  • Max. wire diameter (at 500 N/mm2 tensile strength)
    20mm
  • Cut-off length
    8 – 125mm
  • Max. outer diameter*
    ~ 32mm
  • Strokes (continuously variable) min-1
    110 – 180
  • Total press capacity
    1700kN

* For round parts made of steel, dependent on the forming degree, the sequence of operations, the material and temperature.
WS = warm series

Do you have any questions?