English
Deutsch
Italiano
中文
日本語
Hatebur HOTmatic HM 35 SAM
The hotformer with new servohydraulic ejector technology for maximum productivity and process reliability.
The HOTmatic HM 35 SAM is a modern forming machine for highest demands. The new hydraulic ejector technology (SAM), the simple operating concept, the short retooling times and the high discharge allow an efficient production of complex formed parts. The innovative infeed and shearing system together with the unique transport system, are able to guarantee a very high production speed as well as a particularly low-impact discharge of the finished parts.
4-station
Hotformer
75 mm
Part diameter
150 parts
Output per minute
3.800 kN
Press capacity
Hatebur HOTmatic HM 35 SAM
Benefit from the following advantages
- Combined forming processes for optimum forming results
- High process reliability
- Controlled and low-impact part discharge
- Clever operating concept for short retooling times
Applications
Our technology means technical precision.
The HOTmatic HM 35 SAM is the ideally suited machine for production of automotive parts and bearing rings.
Technical specifications
HOTmatic Model series
- Forming stations
- Bar diameter mm
- Initial weight kg
- Cut-off length mm
- Max. outer diameter* mm
- Max. outer diameter for combination parts mm
- Max. width across falts (hex) made of steel ca. mm
- Strokes per minute (continuously variable)
- Total press capacity kN
AMP 20 S
3
14 – 28
0,02 – 0,17
15 – 40
~ 38
–
36**
140 – 200
900
AMP 20 N
3
14 – 28
0,024 – 0,217
20 – 45
~ 48
–
41**
140 – 200
1500
AMP 30 S
3
18 – 40
0,05 – 0,7
20 – 72
~ 67
~ 58
60
85 – 140
2500
AMP 50-9
4
28 – 55
0,17 – 2,0
32 – 110
~ 108
~ 100
90
60 – 100
9000
AMP 50-9 HFE
4
28 – 55
0,17 – 2,0
32 – 110
~ 108
~ 100
90
60 – 100
9000
AMP 70
4
36 – 75
0,4 – 5,0
50 – 150
~ 145
~ 122
130
50 – 80
15000
AMP 70 HFE
4
36 – 75
0,4 – 5,0
50 – 150
~ 145
~ 122
130
50 – 80
15000
AMP 70 XL
4
36 – 75
0,4 – 5,0
50 – 150
~ 165
~ 122
130
50 – 80
15000
AMP 70 XL HFE
4
36 – 75
0,4 – 5,0
50 – 150
~ 165
~ 122
130
50 – 80
15000
HM 35 SAM
4
18 – 45
0,06 – 0,9
28 – 75
~ 75
~ 68
65
110 – 150
3800
HM 75 XL
4
45 – 90
0,95 – 7,5
75 – 175
~ 180
~ 144
–
–
–
- HM 35 SAM
- Forming stations4
- Bar diameter18 – 45mm
- Initial weight0,06 – 0,9kg
- Cut-off length28 – 75mm
- Max. outer diameter*~ 75mm
- Max. outer diameter for combination parts~ 68mm
- Max. width across falts (hex) made of steel ca.65mm
- Strokes per minute (continuously variable)110 – 150
- Total press capacity3800kN
* For round parts made of steel, depending on forming degree, sequence of operation, material and temperature.
** Max. width across flats (hexagon) made of brass approx. 38 mm
Further products
HOTmatic Model series
