Hatebur HOTmatic HM 35 SAM

The hotformer with new servohydraulic ejector technology for maximum productivity and process reliability. 

The HOTmatic HM 35 SAM is a modern forming machine for highest demands. The new hydraulic ejector technology (SAM), the simple operating concept, the short retooling times and the high discharge allow an efficient production of complex formed parts. The innovative infeed and shearing system together with the unique transport system, are able to guarantee a very high production speed as well as a particularly low-impact discharge of the finished parts. 

4-station

Hotformer

75 mm

Part diameter

150 parts

Output per minute

3.800 kN

Press capacity

Hatebur HOTmatic HM 35 SAM

Benefit from the following advantages

  • Combined forming processes for optimum forming results 
  • High process reliability 
  • Controlled and low-impact part discharge 
  • Clever operating concept for short retooling times 

Applications

Our technology means technical precision.

The HOTmatic HM 35 SAM is the ideally suited machine for production of automotive parts and bearing rings.

Technical specifications

HOTmatic Model series

  • Forming stations
  • Bar diameter mm
  • Initial weight kg
  • Cut-off length mm
  • Max. outer diameter* mm
  • Max. outer diameter for combination parts mm
  • Max. width across falts (hex) made of steel ca. mm
  • Strokes per minute (continuously variable)
  • Total press capacity kN

AMP 20 S

3

14 – 28

0,02 – 0,17

15 – 40

~ 38

36**

140 – 200

900

AMP 20 N

3

14 – 28

0,024 – 0,217

20 – 45

~ 48

41**

140 – 200

1500

AMP 30 S

3

18 – 40

0,05 – 0,7

20 – 72

~ 67

~ 58

60

85 – 140

2500

AMP 50-9

4

28 – 55

0,17 – 2,0

32 – 110

~ 108

~ 100

90

60 – 100

9000

AMP 50-9 HFE

4

28 – 55

0,17 – 2,0

32 – 110

~ 108

~ 100

90

60 – 100

9000

AMP 70

4

36 – 75

0,4 – 5,0

50 – 150

~ 145

~ 122

130

50 – 80

15000

AMP 70 HFE

4

36 – 75

0,4 – 5,0

50 – 150

~ 145

~ 122

130

50 – 80

15000

AMP 70 XL

4

36 – 75

0,4 – 5,0

50 – 150

~ 165

~ 122

130

50 – 80

15000

AMP 70 XL HFE

4

36 – 75

0,4 – 5,0

50 – 150

~ 165

~ 122

130

50 – 80

15000

HM 35 SAM

4

18 – 45

0,06 – 0,9

28 – 75

~ 75

~ 68

65

110 – 150

3800

HM 75 XL

4

45 – 90

0,95 – 7,5

75 – 175

~ 180

~ 144

  • HM 35 SAM
  • Forming stations
    4
  • Bar diameter
    18 – 45mm
  • Initial weight
    0,06 – 0,9kg
  • Cut-off length
    28 – 75mm
  • Max. outer diameter*
    ~ 75mm
  • Max. outer diameter for combination parts
    ~ 68mm
  • Max. width across falts (hex) made of steel ca.
    65mm
  • Strokes per minute (continuously variable)
    110 – 150
  • Total press capacity
    3800kN

* For round parts made of steel, depending on forming degree, sequence of operation, material and temperature.
** Max. width across flats (hexagon) made of brass approx. 38 mm

Do you have any questions?

Do you have any questions?

Contact us.

I have read the privacy policy and agree to its terms.