[Translate to English:] HOTmatic AMP 2 S
[Translate to English:] HOTmatic AMP 20 S
[Translate to English:] HOTmatic AMP 2 S
[Translate to English:] HOTmatic AMP 20 S

Hatebur HOTmatic AMP 20 S

The compact hotformer with a high part output.

The HOTmatic AMP 20 S is the ideal machine to produce steel and brass parts with diameter of up to 38 mm in large quantities with an output of up to 200 parts per minute.

3-stations

Hotformer

38 mm

Part diameter

200 parts

Output per minute

900 kN

Total press capacity

HOTmatic AMP 20 S - Körperansicht

Hatebur HOTmatic AMP 20 S

Benefit from the following advantages

  • Simple operation and conversion
  • Very high production output
  • Accurate transfer
  • Compact dimensions
  • Manufacture of brass parts possible

Applications

Our technology means technical precision and versatility.

The HOTmatic AMP 20 S is ideally suited for automated forging of parts such as hex-nuts, flange nuts, cam lobes, bearing rings, brass balls, brass liners, etc.

The machine’s proven and reliable technology and fast changeover times ensures a high level of machine availability and make production operationprofitable.

Technical specifications

HOTmatic Model series

  • Forming stations
  • Bar diameter mm
  • Initial weight kg
  • Cut-off length mm
  • Max. outer diameter* mm
  • Max. outer diameter for combination parts mm
  • Max. width across falts (hex) made of steel ca. mm
  • Strokes per minute (continuously variable)
  • Total press capacity kN

AMP 20 S

3

14 – 28

0,02 – 0,17

15 – 40

~ 38

36**

140 – 200

900

AMP 20 N

3

14 – 28

0,024 – 0,217

20 – 45

~ 48

41**

140 – 200

1500

AMP 30 S

3

18 – 40

0,05 – 0,7

20 – 72

~ 67

~ 58

60

85 – 140

2500

AMP 50-9

4

28 – 55

0,17 – 2,0

32 – 110

~ 108

~ 100

90

60 – 100

9000

AMP 50-9 HFE

4

28 – 55

0,17 – 2,0

32 – 110

~ 108

~ 100

90

60 – 100

9000

AMP 70

4

36 – 75

0,4 – 5,0

50 – 150

~ 145

~ 122

130

50 – 80

15000

AMP 70 HFE

4

36 – 75

0,4 – 5,0

50 – 150

~ 145

~ 122

130

50 – 80

15000

AMP 70 XL

4

36 – 75

0,4 – 5,0

50 – 150

~ 165

~ 122

130

50 – 80

15000

AMP 70 XL HFE

4

36 – 75

0,4 – 5,0

50 – 150

~ 165

~ 122

130

50 – 80

15000

HM 35 SAM

4

18 – 45

0,06 – 0,9

28 – 75

~ 75

~ 68

65

110 – 150

3800

HM 75 XL

4

45 – 90

0,95 – 7,5

75 – 175

~ 180

~ 144

  • AMP 20 S
  • Forming stations
    3
  • Bar diameter
    14 – 28mm
  • Initial weight
    0,02 – 0,17kg
  • Cut-off length
    15 – 40mm
  • Max. outer diameter*
    ~ 38mm
  • Max. outer diameter for combination parts
    mm
  • Max. width across falts (hex) made of steel ca.
    36**mm
  • Strokes per minute (continuously variable)
    140 – 200
  • Total press capacity
    900kN

* For round parts made of steel, depending on forming degree, sequence of operation, material and temperature.
** Max. width across flats (hexagon) made of brass approx. 38 mm

Do you have any questions?

Do you have any questions?

Contact us.

I have read the privacy policy and agree to its terms.