COLDmatic CM 725 WS
COLDmatic CM 725 WS

Hatebur COLDmatic CM 725 WS

The flexible coldformer for challenging form parts.

The COLDmatic 725 WS is the ideal machine for forming precise and complex parts. It is characterized by a compact design, reduced space requirement, short commissioning time, easy set-up and changeover.

With the pre-heating equipment close to the shearing knife it is possible to process high temperature alloys.

7-station

Coldformer

32 mm

Part diameter

170 parts

Output per minute

2.500 kN

Press capacity

Hatebur COLDmatic CM 725 WS

Benefit from the following advantages.

  • Accurate servo infeed system
  • Precision high-speed shearing
  • Precise and versatile part transfer system
  • High flexibility for a broad range of applications
  • Gentle part discharge

Applications

Our technology means technical precision and versatility.

The COLDmatic CM 725 WS is ideal for the production of formed parts that have a diameter of up to approx. 30 mm. The seven-station technology is ideal for the manufacturing of demanding and complex part geometries.

Thanks to this, flat parts as well as those that have an extremely thin collar or parts that are difficult to transport can be precisely formed. The forming can take place both on the punch- and die-side.

Technical specifications

COLDmatic Model series

  • Forming stations
  • Max. wire diameter (at 500 N/mm2 tensile strength) mm
  • Cut-off length mm
  • Max. outer diameter* mm
  • Strokes (continuously variable) min-1
  • Total press capacity kN
  • Inductive heating

CM 4-5ECO

5

22

8 – 125

~ 32

110 – 160

1700

CM 4-5ECO H

5

20

8 – 125

~ 32

110 – 180

1700

CM 4-5ECO WS

5

22

8 – 125

~ 32

110 – 160

1700

CM 4-5ECO H WS

5

20

8 – 125

~ 32

110 – 180

1700

CM 625

6

22

8 – 125

~ 32

110 – 170

2500

CM 625 WS

6

22

8 – 125

~ 32

110 – 170

2500

CM 725

7

22

8 – 125

~ 32

110 – 170

2500

CM 725 WS

7

22

8 – 125

~ 32

110 – 170

2500

  • CM 725 WS
  • Forming stations
    7
  • Max. wire diameter (at 500 N/mm2 tensile strength)
    22mm
  • Cut-off length
    8 – 125mm
  • Max. outer diameter*
    ~ 32mm
  • Strokes (continuously variable) min-1
    110 – 170
  • Total press capacity
    2500kN
  • Inductive heating

* For round parts made of steel, dependent on the forming degree, the sequence of operations, the material and temperature.
WS = warm series

Do you have any questions?

Do you have any questions?

Contact us.

I have read the privacy policy and agree to its terms.