English
Deutsch
Italiano
中文
日本語
Hatebur HOTmatic AMP 30 S
The three-station hotformer for medium-sized forgings.
The Hotmatic AMP 30 S is a three-station hotformer for medium size forgings with a diameter of up to 67 mm and a production output of up to 140 parts per minute.
3-station
Hotformer
67 mm
Part diameter
140 parts
Output per minute
2.500 kN
Total press capacity
Hatebur HOTmatic AMP 30 S
Benefit from the following advantages
- Easy to set-up and operate
- High production output
- Versatile for a broad range of applications
- Well proven design
Applications
Our technology means technical precision.
The HOTmatic AMP 30 S is an ideally suited machine for the fully automated production of forged parts for the automotive, fittings and bearing industries. The broad scope of application means that it is a good all-round machine for forging parts with large annual volumes.
Technical specifications
HOTmatic Model series
- Forming stations
- Bar diameter mm
- Initial weight kg
- Cut-off length mm
- Max. outer diameter* mm
- Max. outer diameter for combination parts mm
- Max. width across falts (hex) made of steel ca. mm
- Strokes per minute (continuously variable)
- Total press capacity kN
AMP 20 S
3
14 – 28
0,02 – 0,17
15 – 40
~ 38
–
36**
140 – 200
900
AMP 20 N
3
14 – 28
0,024 – 0,217
20 – 45
~ 48
–
41**
140 – 200
1500
AMP 30 S
3
18 – 40
0,05 – 0,7
20 – 72
~ 67
~ 58
60
85 – 140
2500
AMP 50-9
4
28 – 55
0,17 – 2,0
32 – 110
~ 108
~ 100
90
60 – 100
9000
AMP 50-9 HFE
4
28 – 55
0,17 – 2,0
32 – 110
~ 108
~ 100
90
60 – 100
9000
AMP 70
4
36 – 75
0,4 – 5,0
50 – 150
~ 145
~ 122
130
50 – 80
15000
AMP 70 HFE
4
36 – 75
0,4 – 5,0
50 – 150
~ 145
~ 122
130
50 – 80
15000
AMP 70 XL
4
36 – 75
0,4 – 5,0
50 – 150
~ 165
~ 122
130
50 – 80
15000
AMP 70 XL HFE
4
36 – 75
0,4 – 5,0
50 – 150
~ 165
~ 122
130
50 – 80
15000
HM 35 SAM
4
18 – 45
0,06 – 0,9
28 – 75
~ 75
~ 68
65
110 – 150
3800
HM 75 XL
4
45 – 90
0,95 – 7,5
75 – 175
~ 180
~ 144
–
–
–
- AMP 30 S
- Forming stations3
- Bar diameter18 – 40mm
- Initial weight0,05 – 0,7kg
- Cut-off length20 – 72mm
- Max. outer diameter*~ 67mm
- Max. outer diameter for combination parts~ 58mm
- Max. width across falts (hex) made of steel ca.60mm
- Strokes per minute (continuously variable)85 – 140
- Total press capacity2500kN
* For round parts made of steel, depending on forming degree, sequence of operation, material and temperature.
** Max. width across flats (hexagon) made of brass approx. 38 mm
Further products
HOTmatic Model series
